MotoHawk SAEJ1939 DM11 Trigger

This block triggers when a DM11 command is sent to the protocol handler.

Block ID

Library

MotoHawk_Protocols_lib

Description

This block triggers all function call subsystems that are attached to the output port when a DM11 (Diagnostic Data Clear) command is sent to the module. The actions when a diagnostic data clear should occur during this trigger. Also, the determination of whether the conditions are correct for the clear action should be determined when this trigger occurs.

Block Parameters

Parameter Field	Values	Comments/Description
Priority Order	Number	When multiple triggers of the same criteria are present, this specifis which will execute first. The lowest priority trigger will be the trigger that decides the response to the DM11 message.
This trigger is inside another triggered subsystem	Checkbox	If the trigger is inside another triggered subsystem, this must be checked.
Trigger even when containing subsystem is disabled	Checkbox	If the trigger is inside another enabled subsystem, then execute this subsystem if that subsystem is enabled.
Associated DM Defintion	String	This field references the DM Definition associated with this trigger.
DM11 Clearing Action	Popup	This field allows for the application developer to manually clear faults in the triggered subsystem. NOTE: An application with multiple DM11 triggers is allowed but if one of the DM11 triggers is set to automatically clear faults, all active faults will be cleared when accepting a DM11 request.