MotoHawk SAEJ1939 DM7 Response

This block can be used by the applciation to alert a sender of a DM7 message that receiving DM7 is not supported, or that the application is unable to process it at this time.

Block ID

Library

MotoHawk_Protocols_lib

Description

Set the response input port to a non-zero value (i.e. 0x01 for ConditionsNotCorrect) to alert the sender via a J1939 nack. Setting the response to a value of 0 will not generate a J1939 acknowledgement, but a DM30 transmission should be sent to the DM7 sender as a positive acknowledgement. This block must reference a J1939 DM7 receive block by name.

Block Parameters

Parameter Field	Values	Comments/Description
Associated DM 7 Definition	String	This field references the DM 7 definition associated with this response.