MotoHawk XCPSlave Reset Request Trigger

Triggers a Simulink Function-Call subsystem when the XCP protocol is requested to issue a module reset.

Block ID

XCPSlave Reset Request Trigger

Library

MotoHawk_Protocols_lib

Description

The Reset Request Trigger block signals the application that a module reset is desired. It is the repsponsibility of the application to execute an appropriate shutdown sequence.The application may choose to accept or deny this particular request through the use of the XCPSlave Reset Response Set block.

The output port provides a trigger or an array of triggers to the applcation.

Block Parameters

Parameter Field	Values	Comments/Description
Priority Order	Number	When multiple triggers of the same criteria are present, this specifis which will execute first.
This trigger is inside another triggered subsystem	Checkbox	If the trigger is inside another triggered subsystem, this must be checked.
Trigger even when containing subsystem is disabled	Checkbox	If the trigger is inside another enabled subsystem, then execute this subsystem if that subsystem is enabled.