Secondary Encoder TDC Offset

This MotoHawk™ block sets the secondary encoder TDC offset.

Block ID

motohawk_encoder_offset

Library

MotoHawk_lib/Encoder Blocks

Description

Operation

Use the input to set the encoder TDC offset of the secondary source, which is required to translate encoder TDC#1 to mechanical TDC#1. It has a fixed point representation with units of 1/16 degrees before TDC#1.

Typically this is fed by a Calibration block, so that the mechanical to electrical TDC offset can be tuned.

Use with the Flexible Encoder

This block can be used with the Flexible Encoder System. The setting applies to Flexible Encoder System source #2. The Flexible Encoder TDC Offset block provides a better fit for flexible encoder solutions.

Block Parameters

This MotoHawk™ block has no user-definable parameters.