Time to Nominal Current Definition

This MotoHawk™ block creates a resource that allows the last observed time to nominal load current diagnostic to be read. This block can be used directly to recover the time or the Time to Nominal Current access block used, which references this block. Whether this feature is supported is driven by the hardware in use. The feature is not supported if the block has an empty resource list.

Block ID

Time to Nominal Current Defn

Library

MotoHawk_lib/Diagnostics

Description

• Signal Descriptions
• Block Mask Parameter Descriptions

Signals

Time to Nominal Current (uS)

Recovers the last observed time to nominal current. Typically the block is used within an end of actuation trigger block so that the time can be recovered upon completion of actuation. A negative value (-1) implies that the selected resource did not achieve the nominal load current. Reasons for this include the load being open circuit (a fault condition) or insufficient battery voltage to achieve the specified nominal current. The nominal current is either specified by a different MotoHawk™ block or defined by the hardware. This block does not specify the nominal current.

Block Parameters

Parameter Field	Values	Comments/Description
Name	Alpha-numeric text, single-quote enclosed	This name will be used by associated Time to Nominal Current accessor block to reference this definition. No special characters, such as spaces, dashes and commas (underscore allowed)
Resource	Drop-down list	Module resource for this block (target module dependent).