CAN Baud Rate Status

This MotoHawk™ block reports the current baud rate status of the selected CAN resource.

Block ID

MotoHawk_Protocols_lib/CAN Blocks

This block outputs one of 4 statuses to the application:

Current Baud Rate : Current baud rate (in bps)
Next Baud Rate : The baud rate that will be applied on the next key up based on current data store values (if "Custom" was selected in the definition block). Otherwise, it outputs the same value as "Current Baud Rate".
Current Sample Point : The sample point (in 1/100s of %)
Next Sample Point : The sample point (in 1/100s of %) that will be applied on the next key up based on current data store values (if "Custom" was selected in the definition block). Otherwise, it outputs the same value as "Current Sample Point".

Note: This block is only guaranteed to work if it references a CAN Definition block.

Parameter Field	Values	Comments/Description
Reference Name	Alpha-numeric text, single-quote enclosed	Specifies the CAN resource. This name must exactly match the name specified in the MotoHawk CAN Definition block.
Status	Dropdown	Specifies the status to output to the application.