MotoHawk OBD Fault Property Get

This block retrieves the current fault property, either by name, or using a obdfault_T input reference.

The output may be one or all of the following properties:

• Suspected X Counts
• Suspected Y Counts
• Pending Drive Cycles
• Total Drive Cycles
• Suspected X Count Limit
• Suspected Y Count Limit
• Pending Drive Cycle Limit
• Total Drive Cycle Limit
• Emission-Related
• Is Permanent

Block ID

OBD Fault Property

Library

MotoHawk OBD Fault Manager

Description

Block Parameters

Parameter Field	Values	Comments/Description
Fault Source	Drop-down List	If "Lookup By Name" is selected, the "Fault Name" parameter is used. If "Input Reference Signal", then the input port is used.
Fault Name	Edit (optional)	This is the name of an existing fault.
Fault Property	Drop-down List	This is the list of properties (Suspected X Counts, Suspected Y Counts, Pending Drive Cycles, Total Drive Cycles, Suspected X Count Limit, Suspected Y Count Limit, Pending Drive Cycle Limit, Total Drive Cycle Limit, Emission-Related, and Is Permanent), plus the option to output all states.