MotoHawk OBD Fault Count Non-Zero Get
This block outputs a boolean indicating whether there is at least one fault that matches the criteria specified by the "Condition Criteria" parameter.
Block ID
OBD Fault Count Non-Zero
Library
MotoHawk OBD Fault Manager
Description
Block Parameters
Parameter Field | Values | Comments/Description |
---|---|---|
Condition Criteria | Drop-down list | Choose one of the following conditions: Suspected, Pending, Confirmed, Ready, MIL Request, Previously Active, Permanent, Test Failed Since Last Clear, Failed This Drive Cycle, Test Complete This Drive Cycle, Test Failing, Failed Last Drive Cycle, or Test Failed Since Key Cycle. |