MotoHawk OBD Fault Property Get
This block retrieves the current fault property, either by name, or using a obdfault_T input reference.
The output may be one or all of the following properties:
- Suspected X Counts
- Suspected Y Counts
- Pending Drive Cycles
- Total Drive Cycles
- Suspected X Count Limit
- Suspected Y Count Limit
- Pending Drive Cycle Limit
- Total Drive Cycle Limit
- Emission-Related
- Is Permanent
Block ID
OBD Fault Property
Library
MotoHawk OBD Fault Manager
Description
Block Parameters
Parameter Field | Values | Comments/Description |
---|---|---|
Fault Source | Drop-down List | If "Lookup By Name" is selected, the "Fault Name" parameter is used. If "Input Reference Signal", then the input port is used. |
Fault Name | Edit (optional) | This is the name of an existing fault. |
Fault Property | Drop-down List | This is the list of properties (Suspected X Counts, Suspected Y Counts, Pending Drive Cycles, Total Drive Cycles, Suspected X Count Limit, Suspected Y Count Limit, Pending Drive Cycle Limit, Total Drive Cycle Limit, Emission-Related, and Is Permanent), plus the option to output all states. |