Triggers a Simulink Function-Call subsystem when the XCP protocol is requested to issue a module reset.
XCPSlave Reset Request Trigger
Woodward Custom XCPSlave
The Reset Request Trigger block signals the application that a module reset is desired. It is the repsponsibility of the application
to execute an appropriate shutdown sequence.The application may choose to accept or deny this particular request through the use of the
XCPSlave Reset Response Set block.
The output port provides a trigger or an array of triggers to the applcation.
Parameter Field | Values | Comments/Description |
---|---|---|
Priority Order | Number | When multiple triggers of the same criteria are present, this specifis which will execute first. |
This trigger is inside another triggered subsystem | Checkbox | If the trigger is inside another triggered subsystem, this must be checked. |
Trigger even when containing subsystem is disabled | Checkbox | If the trigger is inside another enabled subsystem, then execute this subsystem if that subsystem is enabled. |
Copyright 2012 Woodward Corporation. All Rights Reserved. | Visit Us: mcs.woodward.com |