 |
Module: GCM-S32K344-012-116-2500
Description: Mercury Marine S32K344 Tactile Feedback Device (TFD)
Copyright: 2025 Woodward
ModuleFamily: ComponentControlCore
CPU Type: S32K344 Family:
S32K3xx Name:
S32K344
160000000Hz
Other Compatible Module Names:
For other modules see Module
Cross Reference
List of Behaviors vs supported resources
| Behavior | Supported on Resources | Comment |
|---|---|---|
| AnalogInput Count: 37 |
||
| PS_LP_BANDGAP | Power Supply ASIC Low Power bandgap (voltage reference) | |
| PS_BANDGAP | Power Supply ASIC Main bandgap (voltage reference) | |
| PS_FS_BANDGAP | Power Supply ASIC Fail-safe bandgap (voltage reference) | |
| PS_ANALOG_SUPPLY | Power Supply ASIC V_ANA: Internal main analog voltage supply | |
| PS_DIGITAL_SUPPLY | Power Supply ASIC V_DIG: Internal main digital voltage supply | |
| PS_DIGITAL_FS_SUPPLY | Power Supply ASIC V_DIG_FS: Internal fail-safe digital voltage supply | |
| PS_VCORE | Power Supply ASIC VCORE feedback pin CORE_FB voltage | |
| PS_VPRE | Power Supply ASIC VPRE feedback pin VPRE_FB voltage | |
| PS_LDO1 | Power Supply ASIC LDO1 feedback pin LDO1OUT voltage | |
| PS_LDO2 | Power Supply ASIC LDO2 feedback pin LDO1OUT voltage | |
| PS_VREF | Power Supply ASIC VREF feedback pin voltage | |
| PS_XDRPA | Power Supply ASIC XDRPA (AKA TRK1) feedback pin voltage | |
| PS_XDRPB | Power Supply ASIC XDRPB (AKA TRK2) feedback pin voltage | |
| PS_VDDIO | Power Supply ASIC VDDIO feedback voltage | |
| PS_VBOS | Power Supply ASIC VBOS internal pin voltage | |
| PS_VBST | Power Supply ASIC VBST feedback pin VBST_FB voltage (divider ratio configurable with AMUX_DIV) | |
| PS_VSUP | Power Supply ASIC VSUP pin voltage (divider ratio configurable with AMUX_DIV) | |
| PS_WAKE1 | ||
| PS_WAKE2 | ||
| PS_GPIO1 | ||
| PS_GPIO2 | ||
| PS_BATSENSE | ||
| PS_DIE_T | Power Supply ASIC Central die temperature sensor. Temp(degC) = (Vread - V_temp25)/V_Temp_Coeff + 25 V_temp25 is typical 2.055 V with range 2.01 to 2.1 V VTEMP_COEFF is typical -5.88 with range -6.25 to -5.5 in mV/degC |
|
| PS_VCORE_T | Power Supply ASIC VCORE temperature sensor. Temp(degC) = (Vread - V_temp25)/V_Temp_Coeff + 25 V_temp25 is typical 2.055 V with range 2.01 to 2.1 V VTEMP_COEFF is typical -5.88 with range -6.25 to -5.5 in mV/degC |
|
| PS_VPRE_T | Power Supply ASIC VPRE temperature sensor. Temp(degC) = (Vread - V_temp25)/V_Temp_Coeff + 25 V_temp25 is typical 2.055 V with range 2.01 to 2.1 V VTEMP_COEFF is typical -5.88 with range -6.25 to -5.5 in mV/degC |
|
| PS_LDO1_T | Power Supply ASIC LDO1 temperature sensor. Temp(degC) = (Vread - V_temp25)/V_Temp_Coeff + 25 V_temp25 is typical 2.055 V with range 2.01 to 2.1 V VTEMP_COEFF is typical -5.88 with range -6.25 to -5.5 in mV/degC |
|
| PS_LDO2_T | Power Supply ASIC LDO2 temperature sensor. Temp(degC) = (Vread - V_temp25)/V_Temp_Coeff + 25 V_temp25 is typical 2.055 V with range 2.01 to 2.1 V VTEMP_COEFF is typical -5.88 with range -6.25 to -5.5 in mV/degC |
|
| PS_XDRPA_T | Power Supply ASIC XDRPA (TRK1) temperature sensor. Temp(degC) = (Vread - V_temp25)/V_Temp_Coeff + 25 V_temp25 is typical 2.055 V with range 2.01 to 2.1 V VTEMP_COEFF is typical -5.88 with range -6.25 to -5.5 in mV/degC |
|
| PS_XDRPB_T | Power Supply ASIC XDRPB (TRK2) temperature sensor. Temp(degC) = (Vread - V_temp25)/V_Temp_Coeff + 25 V_temp25 is typical 2.055 V with range 2.01 to 2.1 V VTEMP_COEFF is typical -5.88 with range -6.25 to -5.5 in mV/degC |
|
| PS_GPIO1_T | Power Supply ASIC GPIO1 temperature sensor. Temp(degC) = (Vread - V_temp25)/V_Temp_Coeff + 25 V_temp25 is typical 2.055 V with range 2.01 to 2.1 V VTEMP_COEFF is typical -5.88 with range -6.25 to -5.5 in mV/degC |
|
| BATT2_ISO | ||
| ECUP | Also known as WAKE1_AN. | |
| SDRIVE_I_CTRL | ||
| SDRIVE_I | ||
| SDRIVE_VOUT | ||
| SDRIVE_VHIGH | ||
| SDRIVE_VLOW | ||
| BootloaderModuleIdentification Count: 1 |
||
| ComponentControlCore | ||
| BootloaderSecurityControl Count: 1 |
||
| ComponentControlCore | ||
| CAN Count: 2 |
||
| CAN_1 |
May also be known as CANP Clock 24000000 Hz. Time Quanta range is 8 to 25. Prescaler range is 1 to 1024. CAN FD Nominal TQ range is 5 to 129. CAN FD Nominal and Fast Prescaler range is 1 to 1024. CAN FD Fast Data TQ range is 5 to 48. |
|
| CAN_2 |
May also be known as CANX Clock 24000000 Hz. Time Quanta range is 8 to 25. Prescaler range is 1 to 1024. CAN FD Nominal TQ range is 5 to 129. CAN FD Nominal and Fast Prescaler range is 1 to 1024. CAN FD Fast Data TQ range is 5 to 48. |
|
| CPUPerformanceMetrics Count: 1 |
||
| CPU0 | ||
| CRCCalc Count: 4 |
||
| RegexpCRC | ||
| CVN | ||
| ApplicationCRC | ||
| CalibrationCRC | ||
| DigitalInput Count: 7 |
||
| WAKE2 | ||
| CURR_TH_RESULT | ||
| HWID0 | ||
| HWID1 | ||
| HWID2 | ||
| HWID3 | ||
| SDRIVE_BATT2_OCFLAG | ||
| DiscreteOutput Count: 4 |
||
| SDRIVE_LS_EN | ||
| SDRIVE_EN | ||
| SDRIVE_BATT2_OCRESET | ||
| SDRIVE_BATT2_DISABLE | A command of true leads to active low assertion | |
| FCCUReaction Count: 1 |
||
| FCCU | ||
| FaultStatus Count: 11 |
||
| PS_TSD_G | ||
| PS_REG_G | ||
| PS_VSUP_G | ||
| PS_COM_G | ||
| PS_FS_G | ||
| PS_FS_COM_G | ||
| PS_FS_WD_G | ||
| PS_FS_IO_G | ||
| PS_FS_REG_OVUV_G | ||
| PS_FS_BIST_G | ||
| PS_FS_PROGRAMMING | ||
| FrequencyInput Count: 2 |
||
| WAKE2 | ||
| CURR_TH_RESULT | ||
| GenericSPI Count: 2 |
||
| HALL1_CS0 | ||
| HALL2_CS0 | ||
| IdleLoopTime Count: 1 |
||
| IdleLoopTime | ||
| MemoryRegionBehavior Count: 2 |
||
| GeneralPurposeRAM | ||
| BufferedNV | ||
| MemoryRegionMap Count: 3 |
||
| SRAM0 | ||
| CPU0_DTCM | ||
| FRAM | ||
| ModuleData Count: 18 |
||
| ProjectID | ||
| Capability | ||
| ECUHWVersion | ||
| BootVersion | ||
| SerialNumber | ||
| ModelNumber | ||
| PartNumber | ||
| CalIdTxt | ||
| SwIdTxt | ||
| SwRevisionTxt | ||
| CompilerVersion | ||
| MotoHawkVersionTxt | ||
| MatlabVersionTxt | ||
| BuildDateTxt | ||
| BuildDateTimeTxt | ||
| BuildDateTime | ||
| S32K3xx_JunctionTemp | ||
| LastMotoSuiteProgrammedBy | ||
| OutputConfiguration Count: 1 |
||
| CLKOUT_RUN | CLKOUT_RUN monitored by TP162 | |
| PWMOutput Count: 3 |
||
| SDRIVE | ||
| OCTH_UPPER | ||
| OCTH_LOWER | ||
| TriggerMetrics Count: 1 |
||
| ComponentControlCore | ||
| UserTask Count: 1 |
||
| ComponentControlCore |
List of Resources vs supported Behaviors
| Resource | Supported Behaviors |
|---|---|
| ComponentControlCore | |
| UserTask | |
| TriggerMetrics | |
| BootloaderSecurityControl | |
| BootloaderModuleIdentification | |
| IdleLoopTime | |
| IdleLoopTime | |
| RegexpCRC | |
| CRCCalc | |
| ProjectID | |
| ModuleData | |
| Capability | |
| ModuleData | |
| ECUHWVersion | |
| ModuleData | |
| BootVersion | |
| ModuleData | |
| SerialNumber | |
| ModuleData | |
| ModelNumber | |
| ModuleData | |
| PartNumber | |
| ModuleData | |
| CalIdTxt | |
| ModuleData | |
| SwIdTxt | |
| ModuleData | |
| SwRevisionTxt | |
| ModuleData | |
| CompilerVersion | |
| ModuleData | |
| MotoHawkVersionTxt | |
| ModuleData | |
| MatlabVersionTxt | |
| ModuleData | |
| BuildDateTxt | |
| ModuleData | |
| BuildDateTimeTxt | |
| ModuleData | |
| BuildDateTime | |
| ModuleData | |
| CPU0 | |
| CPUPerformanceMetrics | |
| S32K3xx_JunctionTemp | |
| ModuleData | |
| SRAM0 | |
| MemoryRegionMap | |
| CPU0_DTCM | |
| MemoryRegionMap | |
| GeneralPurposeRAM | |
| MemoryRegionBehavior | |
| FCCU | |
| FCCUReaction | |
| PS_TSD_G | |
| FaultStatus | |
| PS_REG_G | |
| FaultStatus | |
| PS_VSUP_G | |
| FaultStatus | |
| PS_COM_G | |
| FaultStatus | |
| PS_FS_G | |
| FaultStatus | |
| PS_FS_COM_G | |
| FaultStatus | |
| PS_FS_WD_G | |
| FaultStatus | |
| PS_FS_IO_G | |
| FaultStatus | |
| PS_FS_REG_OVUV_G | |
| FaultStatus | |
| PS_FS_BIST_G | |
| FaultStatus | |
| PS_FS_PROGRAMMING | |
| FaultStatus | |
| PS_LP_BANDGAP | |
| AnalogInput | |
| PS_BANDGAP | |
| AnalogInput | |
| PS_FS_BANDGAP | |
| AnalogInput | |
| PS_ANALOG_SUPPLY | |
| AnalogInput | |
| PS_DIGITAL_SUPPLY | |
| AnalogInput | |
| PS_DIGITAL_FS_SUPPLY | |
| AnalogInput | |
| PS_VCORE | |
| AnalogInput | |
| PS_VPRE | |
| AnalogInput | |
| PS_LDO1 | |
| AnalogInput | |
| PS_LDO2 | |
| AnalogInput | |
| PS_VREF | |
| AnalogInput | |
| PS_XDRPA | |
| AnalogInput | |
| PS_XDRPB | |
| AnalogInput | |
| PS_VDDIO | |
| AnalogInput | |
| PS_VBOS | |
| AnalogInput | |
| PS_VBST | |
| AnalogInput | |
| PS_VSUP | |
| AnalogInput | |
| PS_WAKE1 | |
| AnalogInput | |
| PS_WAKE2 | |
| AnalogInput | |
| PS_GPIO1 | |
| AnalogInput | |
| PS_GPIO2 | |
| AnalogInput | |
| PS_BATSENSE | |
| AnalogInput | |
| PS_DIE_T | |
| AnalogInput | |
| PS_VCORE_T | |
| AnalogInput | |
| PS_VPRE_T | |
| AnalogInput | |
| PS_LDO1_T | |
| AnalogInput | |
| PS_LDO2_T | |
| AnalogInput | |
| PS_XDRPA_T | |
| AnalogInput | |
| PS_XDRPB_T | |
| AnalogInput | |
| PS_GPIO1_T | |
| AnalogInput | |
| CVN | |
| CRCCalc | |
| ApplicationCRC | |
| CRCCalc | |
| CalibrationCRC | |
| CRCCalc | |
| BATT2_ISO | |
| AnalogInput | |
| ECUP | |
| AnalogInput | |
| SDRIVE_I_CTRL | |
| AnalogInput | |
| SDRIVE_I | |
| AnalogInput | |
| SDRIVE_VOUT | |
| AnalogInput | |
| SDRIVE_VHIGH | |
| AnalogInput | |
| SDRIVE_VLOW | |
| AnalogInput | |
| WAKE2 | |
| DigitalInput | |
| FrequencyInput | |
| CURR_TH_RESULT | |
| DigitalInput | |
| FrequencyInput | |
| HWID0 | |
| DigitalInput | |
| HWID1 | |
| DigitalInput | |
| HWID2 | |
| DigitalInput | |
| HWID3 | |
| DigitalInput | |
| SDRIVE_BATT2_OCFLAG | |
| DigitalInput | |
| CAN_1 | |
| CAN | |
| CAN_2 | |
| CAN | |
| LastMotoSuiteProgrammedBy | |
| ModuleData | |
| CLKOUT_RUN | |
| OutputConfiguration | |
| SDRIVE_LS_EN | |
| DiscreteOutput | |
| HALL1_CS0 | |
| GenericSPI | |
| HALL2_CS0 | |
| GenericSPI | |
| SDRIVE | |
| PWMOutput | |
| OCTH_UPPER | |
| PWMOutput | |
| OCTH_LOWER | |
| PWMOutput | |
| SDRIVE_EN | |
| DiscreteOutput | |
| SDRIVE_BATT2_OCRESET | |
| DiscreteOutput | |
| SDRIVE_BATT2_DISABLE | |
| DiscreteOutput | |
| FRAM | |
| MemoryRegionMap | |
| BufferedNV | |
| MemoryRegionBehavior |
Cross Reference
| CrossRef | AnalogInput | BootloaderModuleIdentification | BootloaderSecurityControl | CAN | CPUPerformanceMetrics | CRCCalc | DigitalInput | DiscreteOutput | FCCUReaction | FaultStatus | FrequencyInput | GenericSPI | IdleLoopTime | MemoryRegionBehavior | MemoryRegionMap | ModuleData | OutputConfiguration | PWMOutput | TriggerMetrics | UserTask |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ApplicationCRC | CRCCalc | |||||||||||||||||||
| BATT2_ISO | AnalogInput | |||||||||||||||||||
| BootVersion | ModuleData | |||||||||||||||||||
| BufferedNV | MemoryRegionBehavior | |||||||||||||||||||
| BuildDateTime | ModuleData | |||||||||||||||||||
| BuildDateTimeTxt | ModuleData | |||||||||||||||||||
| BuildDateTxt | ModuleData | |||||||||||||||||||
| CAN_1 | CAN | |||||||||||||||||||
| CAN_2 | CAN | |||||||||||||||||||
| CLKOUT_RUN | OutputConfiguration | |||||||||||||||||||
| CPU0 | CPUPerformanceMetrics | |||||||||||||||||||
| CPU0_DTCM | MemoryRegionMap | |||||||||||||||||||
| CURR_TH_RESULT | DigitalInput | FrequencyInput | ||||||||||||||||||
| CVN | CRCCalc | |||||||||||||||||||
| CalIdTxt | ModuleData | |||||||||||||||||||
| CalibrationCRC | CRCCalc | |||||||||||||||||||
| Capability | ModuleData | |||||||||||||||||||
| CompilerVersion | ModuleData | |||||||||||||||||||
| ComponentControlCore | BootloaderModuleIdentification | BootloaderSecurityControl | TriggerMetrics | UserTask | ||||||||||||||||
| ECUHWVersion | ModuleData | |||||||||||||||||||
| ECUP | AnalogInput | |||||||||||||||||||
| FCCU | FCCUReaction | |||||||||||||||||||
| FRAM | MemoryRegionMap | |||||||||||||||||||
| GeneralPurposeRAM | MemoryRegionBehavior | |||||||||||||||||||
| HALL1_CS0 | GenericSPI | |||||||||||||||||||
| HALL2_CS0 | GenericSPI | |||||||||||||||||||
| HWID0 | DigitalInput | |||||||||||||||||||
| HWID1 | DigitalInput | |||||||||||||||||||
| HWID2 | DigitalInput | |||||||||||||||||||
| HWID3 | DigitalInput | |||||||||||||||||||
| IdleLoopTime | IdleLoopTime | |||||||||||||||||||
| LastMotoSuiteProgrammedBy | ModuleData | |||||||||||||||||||
| MatlabVersionTxt | ModuleData | |||||||||||||||||||
| ModelNumber | ModuleData | |||||||||||||||||||
| MotoHawkVersionTxt | ModuleData | |||||||||||||||||||
| OCTH_LOWER | PWMOutput | |||||||||||||||||||
| OCTH_UPPER | PWMOutput | |||||||||||||||||||
| PS_ANALOG_SUPPLY | AnalogInput | |||||||||||||||||||
| PS_BANDGAP | AnalogInput | |||||||||||||||||||
| PS_BATSENSE | AnalogInput | |||||||||||||||||||
| PS_COM_G | FaultStatus | |||||||||||||||||||
| PS_DIE_T | AnalogInput | |||||||||||||||||||
| PS_DIGITAL_FS_SUPPLY | AnalogInput | |||||||||||||||||||
| PS_DIGITAL_SUPPLY | AnalogInput | |||||||||||||||||||
| PS_FS_BANDGAP | AnalogInput | |||||||||||||||||||
| PS_FS_BIST_G | FaultStatus | |||||||||||||||||||
| PS_FS_COM_G | FaultStatus | |||||||||||||||||||
| PS_FS_G | FaultStatus | |||||||||||||||||||
| PS_FS_IO_G | FaultStatus | |||||||||||||||||||
| PS_FS_PROGRAMMING | FaultStatus | |||||||||||||||||||
| PS_FS_REG_OVUV_G | FaultStatus | |||||||||||||||||||
| PS_FS_WD_G | FaultStatus | |||||||||||||||||||
| PS_GPIO1 | AnalogInput | |||||||||||||||||||
| PS_GPIO1_T | AnalogInput | |||||||||||||||||||
| PS_GPIO2 | AnalogInput | |||||||||||||||||||
| PS_LDO1 | AnalogInput | |||||||||||||||||||
| PS_LDO1_T | AnalogInput | |||||||||||||||||||
| PS_LDO2 | AnalogInput | |||||||||||||||||||
| PS_LDO2_T | AnalogInput | |||||||||||||||||||
| PS_LP_BANDGAP | AnalogInput | |||||||||||||||||||
| PS_REG_G | FaultStatus | |||||||||||||||||||
| PS_TSD_G | FaultStatus | |||||||||||||||||||
| PS_VBOS | AnalogInput | |||||||||||||||||||
| PS_VBST | AnalogInput | |||||||||||||||||||
| PS_VCORE | AnalogInput | |||||||||||||||||||
| PS_VCORE_T | AnalogInput | |||||||||||||||||||
| PS_VDDIO | AnalogInput | |||||||||||||||||||
| PS_VPRE | AnalogInput | |||||||||||||||||||
| PS_VPRE_T | AnalogInput | |||||||||||||||||||
| PS_VREF | AnalogInput | |||||||||||||||||||
| PS_VSUP | AnalogInput | |||||||||||||||||||
| PS_VSUP_G | FaultStatus | |||||||||||||||||||
| PS_WAKE1 | AnalogInput | |||||||||||||||||||
| PS_WAKE2 | AnalogInput | |||||||||||||||||||
| PS_XDRPA | AnalogInput | |||||||||||||||||||
| PS_XDRPA_T | AnalogInput | |||||||||||||||||||
| PS_XDRPB | AnalogInput | |||||||||||||||||||
| PS_XDRPB_T | AnalogInput | |||||||||||||||||||
| PartNumber | ModuleData | |||||||||||||||||||
| ProjectID | ModuleData | |||||||||||||||||||
| RegexpCRC | CRCCalc | |||||||||||||||||||
| S32K3xx_JunctionTemp | ModuleData | |||||||||||||||||||
| SDRIVE | PWMOutput | |||||||||||||||||||
| SDRIVE_BATT2_DISABLE | DiscreteOutput | |||||||||||||||||||
| SDRIVE_BATT2_OCFLAG | DigitalInput | |||||||||||||||||||
| SDRIVE_BATT2_OCRESET | DiscreteOutput | |||||||||||||||||||
| SDRIVE_EN | DiscreteOutput | |||||||||||||||||||
| SDRIVE_I | AnalogInput | |||||||||||||||||||
| SDRIVE_I_CTRL | AnalogInput | |||||||||||||||||||
| SDRIVE_LS_EN | DiscreteOutput | |||||||||||||||||||
| SDRIVE_VHIGH | AnalogInput | |||||||||||||||||||
| SDRIVE_VLOW | AnalogInput | |||||||||||||||||||
| SDRIVE_VOUT | AnalogInput | |||||||||||||||||||
| SRAM0 | MemoryRegionMap | |||||||||||||||||||
| SerialNumber | ModuleData | |||||||||||||||||||
| SwIdTxt | ModuleData | |||||||||||||||||||
| SwRevisionTxt | ModuleData | |||||||||||||||||||
| WAKE2 | DigitalInput | FrequencyInput |
| Copyright 2010-2025 Woodward Corporation. All Rights Reserved. | Visit Us: mcs.woodward.com |