Detect Open Load While Asserted Configuration

Use this MotoHawk™ block to enable or disable the open load detection diagnostic that runs while the output is asserted. Only resources whose hardware allows such configuration will be available for configuration.

Block ID

Open Load While Asserted Configuration

Library

MotoHawk_lib/Module Configuration Blocks

Description

 

Some output drivers have the capability to detect an open circuit condition even while the drive is asserted. This detection is typically seperate to the detection of an open circuit while the drive is not asserted. Such detection often places requirements on the load that must be met before the diagnostic will operate reliably. This block allows the application to define whether this diagnostic should be used. The resource list will only be populated with outputs that support this configuration

Block Parameters

Parameter Field	Values	Comments/Description
Name	Alpha-numeric text, single-quote enclosed	Provide the block name for reference. No special characters, such as spaces, dashes, commas (underscore allowed).
Default Condition*	Drop down	The open load diagnostic condition to be applied. A disabled diagnostic won't trip an open circuit fault.
Resource	Listed Pin designations per target module	Assign the associated module output pin.
Allow attributes marked with a * to be calibrated. Calibration applied at KeyOn	Check box (enable)	Name, Access Levels and Group Strings fields available.
Read Access Level	0-8	Sets security lever 1 lowest, 8 highest, for user access to read value. A setting of zero indicates unsecured access is allowed.
Write Access Level	0-8	Sets security lever 1 lowest, 8 highest, for user access to write value. A setting of zero indicates unsecured access is allowed.
Group String	Alpha-numeric text	Determines folder name and hierarchy as displayed. Use "|" character between folder names to delineate subfolder structure.