MotoHawk OBD Fault Status Get
This block returns the status of the condition (boolean) selected by the "Fault Condition" parameter.
Block ID
OBD Fault Status
Library
MotoHawk OBD Fault Manager
Description
Block Parameters
Parameter Field | Values | Comments/Description |
---|---|---|
Fault Source | Drop-down List | If "Lookup By Name" is selected, the "Fault Name" parameter is used. If "Input Reference Signal", then the input port is used. |
Fault Name | Edit (optional) | This is the name of an existing fault. This can be a cell array of fault names as well if more than one fault status is desired. |
Fault Condition | Drop-down List | Choose one of the following conditions: Suspected, Pending, Confirmed, Ready, MIL Request, Previously Active, Permanent, Test Failed Since Last Clear, Failed This Drive Cycle, Test Complete This Drive Cycle, Test Failing, Failed Last Drive Cycle, or Test Failed Since Key Cycle. |