This block clears OBD faults that are defined in the application. It initializes all conditions and counters except for the Permanent condition. The Marked For Clear block is the only method for clearing the Permanent condition once it has been set.
The "Fault Type" parameter selects the subset of faults that will be cleared when this block is triggered. "All" will cause all faults to be cleared, while "Emission-related" will only clear emission-related faults.
OBD Fault Clear All
MotoHawk OBD Fault Manager
Parameter Field | Values | Comments/Description |
---|---|---|
Fault Type | Drop Down | Selects the fault type to clear. "All" is all faults. "Emission-Related" only clears the faults calibrated to be emission-related faults. |
Copyright 2010-2018 Woodward Corporation. All Rights Reserved. | Visit Us: mcs.woodward.com |