MotoHawk:Blocks:Force Module Reset
From MotoHawk
Revision as of 16:37, 4 June 2012 by Wendy.Bolakowski (talk | contribs) (Created page with " =Force Module Reset= This MotoHawk™ block forces a reset of the ECU (module). ==Block ID== Force Module Reset ==Library== MotoHawk_lib/Extra Development Blocks ==Desc...")
Force Module Reset
This MotoHawk™ block forces a reset of the ECU (module).
Block ID
Force Module Reset
Library
MotoHawk_lib/Extra Development Blocks
Description
Non-volatile parameters will not be stored. Model logic will stop immediately, and re-initiate as if in transition to key-on position. Place this block with caution; it may be advisable to place in an enabled or triggered subsystem to avoid unwanted resets.
Block Parameters
This MotoHawk™ block has no user-definable parameters.
