MotoHawk:Blocks:Function Call Collector Input
From MotoHawk
Revision as of 20:43, 20 September 2012 by Wendy.Bolakowski (talk | contribs) (Created page with "=Function-Call Collector (With Input)= This MotoHawk™ block would typically be used in order to trigger a downstream subsystem once every time this block is processed, usin...")
Contents
Function-Call Collector (With Input)
This MotoHawk™ block would typically be used in order to trigger a downstream subsystem once every time this block is processed, using a count supplied by the input value.
Block ID
motohawk_function_collector_in
Library
MotoHawk_lib/Extra Development Blocks
Description
This block sits in an inherited subsystem, and it triggers the downstream subsystem once every 'count' times this block is processed. It acts like a function-call clock divider. Count is supplied via the input signal.
Block Parameters
This MotoHawk™ block has no user-definable parameters.
