48-pin Module Family

See Product Guide for Detailed Part Numbers of Modules and Related Part Numbers (Harnesses, Connectors..) as well as Block Diagram IO comparisons.

ECM-0563-048

Hardware Features

Microprocessor: MPC563, 56MHz

Memory: 512K Flash, 32K RAM(24K+4K overlayable)

128K parallel EEPROM (ECM-0563-048-0701-C)

Operating Voltage: 8-16VDC

Operating Temperature: -40° to 105° C

Sealed Connectors Operable to 10ft submerged

Inputs

• 13 Analog Inputs
• 2 VR/HallFrequency Inputs

Outputs

4 Low Side Injector Drivers

8 TTL Level Ignition System Outputs

5 High Current Low Side PWMs

2 5A H-Bridge PWMs with Current Feedback

Independent Transducer Power Supply

1 Low SideRelay Driver (Main Power)

Datalinks

• 1 CAN 2.0B Channel

Notes GHS 3.6, 4.2.1, or 4.2.4 version required, GCC may be used also.

Part Numbers

ECM Differences:

ECM-0563-048-0701: 1 CAN channel, 13 analog inputs, 2 digital/VR inputs, 4 injector/low-side drivers, 8 TTL spark timing outputs, 5 low-side drivers, 2 H-bridges, one Main Power Relay low-side driver.

ECM-0563-048-0705: similar to ECM-0563-048-0701 module, including same pull-up / pull-down resistors, but only has 1 H-bridge and has 2 more low-side drivers.

ECM-0563-048-0806: same as ECM-0563-048-0705 module, but with different boot code

ECM-0563-048-0704: same features as ECM-0563-048-0705, but pull-up / pull-down resistors are different.

GCM-0563-048 General Control Module

Hardware Features

Microprocessor: MPC563, 40MHz

Memory: 512K Flash, 32K RAM (4K overlayable)

16K serial EEPROM

128K parallel EEPROM (GCM-0563-048-0801-C)

Operating Voltage: 8-32VDC

Operating Temperature: -40° to 105° C

Sealed Connectors Operable to 10ft. submerged

Inputs

Up to 16 Analog Inputs

Up to 7 Discrete/Frequency Inputs

Up to 2 VR/Hall Frequency Inputs

1 Emergency Stop Input

Outputs

2 3A Low Side Drivers w/Current Feedback

4 3A Low Side Drivers

2 2.9A High Side Drivers

1 1A EasyLink/Low Side Driver

1 Relay Driver (Main Power)

1 10A H-Bridge Driver

Datalinks

3 CAN 2.0B Channels

Part Numbers

HCM-0563-048 Hydraulic Control Module

Hardware Features

Microprocessor: MPC563, 40MHz

Memory: 512K Flash, 32K RAM (4K overlayable)

16K serial EEPROM

128K parallel EEPROM

Operating Voltage: 8-32VDC

Operating Temperature: -40° to 85° C

Sealed Connectors Operable to 10ft. submerged

Inputs

Up to 16 Analog Inputs

Up to 6 Discrete/Frequency Inputs

Up to 2 VR/Hall Frequency Inputs

1 Knock/Drive Noise Detector Input

1 Stop Input

Outputs

6 2.5A Low Side Drivers w/Current Feedback

4 3A Low Side Drivers

1 1A EasyLink/Low Side Driver

1 Relay Driver (Main Power)

Datalinks

2 CAN 2.0B Channels

Part Numbers

ECM-0555-048

Hardware Features

Microprocessor: Freescale MPC555, 40MHz

Memory: 448K Flash, 26K RAM,

4K serial EEPROM Flash, Except: 0710 - 8K serial EEPROM

Calibratible Memory: 64K parallel EEPROM

Operating Voltage: 8-16VDC

Operating Temperature: -40° to 85° C (in benchmark marine engine application)

Sealed Connectors Operable to 10 ft. submerged

Inputs

12 to 15 Analog Inputs

3 or 4 Low Frequency Digital Inputs

1 or 2 Hall Effect Frequency Inputs (cam)

0 or 1 Variable Reluctance Frequency Input (crank)

0 to 2 Knock Sensor Inputs

1 Stop Input

Outputs*

4 Injector Driver Outputs

1 to 4 Electronic Spark Trigger (5V) Ouputs

1 Tachometer Output

4 or 5 Low Side Outputs

1 Main Power Relay Driver Output

Datalinks

1 CAN 2.0B Channel

1 RS-485 Channel

Part Numbers