Difference between revisions of "48-pin Module Family"
(→Part Numbers) |
(→Hardware Features) |
||
Line 12: | Line 12: | ||
:Operating Temperature: -40° to 105° C | :Operating Temperature: -40° to 105° C | ||
:Sealed Connectors Operable to 10ft submerged | :Sealed Connectors Operable to 10ft submerged | ||
+ | |||
+ | == DEV and PROD Flash Memory == | ||
+ | The 48-pin modules have 512k Flash memory, but not all of that is available for general use. 64k of this memory is reserved for Module Configuration and Hardboot. The PROD module will also have a fixed 64k less memory because 64k of flash is reserved for calibration space, while on the DEV module the calibrations are stored in a parallel EEPROM. | ||
===Inputs=== | ===Inputs=== |
Revision as of 08:16, 25 October 2013
See Product Guide for Detailed Part Numbers of Modules and Related Part Numbers (Harnesses, Connectors..) as well as Block Diagram IO comparisons.
Contents
ECM-0563-048
Hardware Features
- Microprocessor: MPC563, 56MHz
- Memory: 512K Flash, 32K RAM(24K+4K overlayable)
- 128K parallel EEPROM (ECM-0563-048-0701-C)
- Operating Voltage: 8-16VDC
- Operating Temperature: -40° to 105° C
- Sealed Connectors Operable to 10ft submerged
DEV and PROD Flash Memory
The 48-pin modules have 512k Flash memory, but not all of that is available for general use. 64k of this memory is reserved for Module Configuration and Hardboot. The PROD module will also have a fixed 64k less memory because 64k of flash is reserved for calibration space, while on the DEV module the calibrations are stored in a parallel EEPROM.
Inputs
- 13 Analog Inputs
- 2 VR/HallFrequency Inputs
Outputs
- 4 Low Side Injector Drivers
- 8 TTL Level Ignition System Outputs
- 5 High Current Low Side PWMs
- 2 5A H-Bridge PWMs with Current Feedback
- Independent Transducer Power Supply
- 1 Low SideRelay Driver (Main Power)
Datalinks
- 1 CAN 2.0B Channel
Notes GHS 3.6, 4.2.1, or 4.2.4 version required, GCC may be used also.
Part Numbers
ECM Differences:
ECM-0563-048-0701: 1 CAN channel, 13 analog inputs, 2 digital/VR inputs, 4 injector/low-side drivers, 8 TTL spark timing outputs, 5 low-side drivers, 2 H-bridges, one Main Power Relay low-side driver.
ECM-0563-048-0705: similar to ECM-0563-048-0701 module, including same pull-up / pull-down resistors, but only has 1 H-bridge and has 2 more low-side drivers.
ECM-0563-048-0806: same as ECM-0563-048-0705 module, but with different boot code
ECM-0563-048-0704: same features as ECM-0563-048-0705, but pull-up / pull-down resistors are different.
GCM-0563-048 General Control Module
Hardware Features
- Microprocessor: MPC563, 40MHz
- Memory: 512K Flash, 32K RAM (4K overlayable)
- 16K serial EEPROM
- 128K parallel EEPROM (GCM-0563-048-0801-C)
- Operating Voltage: 8-32VDC
- Operating Temperature: -40° to 105° C
- Sealed Connectors Operable to 10ft. submerged
Inputs
- Up to 16 Analog Inputs
- Up to 7 Discrete/Frequency Inputs
- Up to 2 VR/Hall Frequency Inputs
- 1 Emergency Stop Input
Outputs
- 2 3A Low Side Drivers w/Current Feedback
- 4 3A Low Side Drivers
- 2 2.9A High Side Drivers
- 1 1A EasyLink/Low Side Driver
- 1 Relay Driver (Main Power)
- 1 10A H-Bridge Driver
Datalinks
- 3 CAN 2.0B Channels
Part Numbers
HCM-0563-048 Hydraulic Control Module
Hardware Features
- Microprocessor: MPC563, 40MHz
- Memory: 512K Flash, 32K RAM (4K overlayable)
- 16K serial EEPROM
- 128K parallel EEPROM
- Operating Voltage: 8-32VDC
- Operating Temperature: -40° to 85° C
- Sealed Connectors Operable to 10ft. submerged
Inputs
- Up to 16 Analog Inputs
- Up to 6 Discrete/Frequency Inputs
- Up to 2 VR/Hall Frequency Inputs
- 1 Knock/Drive Noise Detector Input
- 1 Stop Input
Outputs
- 6 2.5A Low Side Drivers w/Current Feedback
- 4 3A Low Side Drivers
- 1 1A EasyLink/Low Side Driver
- 1 Relay Driver (Main Power)
Datalinks
- 2 CAN 2.0B Channels
Part Numbers
ECM-0555-048
Hardware Features
- Microprocessor: Freescale MPC555, 40MHz
- Memory: 448K Flash, 26K RAM,
- 4K serial EEPROM Flash, Except: 0710 - 8K serial EEPROM
- Calibratible Memory: 64K parallel EEPROM
- Operating Voltage: 8-16VDC
- Operating Temperature: -40° to 85° C (in benchmark marine engine application)
- Sealed Connectors Operable to 10 ft. submerged
Inputs
- 12 to 15 Analog Inputs
- 3 or 4 Low Frequency Digital Inputs
- 1 or 2 Hall Effect Frequency Inputs (cam)
- 0 or 1 Variable Reluctance Frequency Input (crank)
- 0 to 2 Knock Sensor Inputs
- 1 Stop Input
Outputs*
- 4 Injector Driver Outputs
- 1 to 4 Electronic Spark Trigger (5V) Ouputs
- 1 Tachometer Output
- 4 or 5 Low Side Outputs
- 1 Main Power Relay Driver Output
Datalinks
- 1 CAN 2.0B Channel
- 1 RS-485 Channel