48-pin Module Family

ECM-0563-048

Hardware Features

Microprocessor: MPC563, 56MHz

Memory: 512K Flash, 32K RAM(24K+4K overlayable)

128K parallel EEPROM (ECM-0563-048-0701-C)

Operating Voltage: 8-16VDC

Operating Temperature: -40° to 105° C

Sealed Connectors Operable to 10ft submerged

Inputs

• 13 Analog Inputs
• 2 VR/HallFrequency Inputs

Outputs

4 Low Side Injector Drivers

8 TTL Level Ignition System Outputs

5 High Current Low Side PWMs

2 5A H-Bridge PWMs with Current Feedback

Independent Transducer Power Supply

1 Low SideRelay Driver (Main Power)

Datalinks

• 1 CAN 2.0B Channel

Notes GHS 3.6 or 4.2.1 version required, GCC may be used also.

Differences: ECM-0563-048-0701: 1 CAN channel, 13 analog inputs, 2 digital/VR inputs, 4 injector/low-side drivers, 8 TTL spark timing outputs, 5 low-side drivers, 2 H-bridges, one Main Power Relay low-side driver.

ECM-0563-048-0705: similar to ECM-0563-048-0701 module, including same pull-up / pull-down resistors, but only has 1 H-bridge and has 2 more low-side drivers.

ECM-0563-048-0806: same as ECM-0563-048-0705 module, but with different hardboot code

ECM-0563-048-0704: same features as ECM-0563-048-0705, but pull-up / pull-down resistors are different.