MotoHawk:Blocks:Clear Fault
From MotoHawk
Revision as of 10:05, 17 May 2012 by Collin.Spencer (talk | contribs) (Created page with "=Clear Fault= This block clears a single Fault, either by name, or using a fault_T input reference. ==Block ID== motohawk_single_fault_clear ==Library== MotoHawk_lib/Faul...")
Clear Fault
This block clears a single Fault, either by name, or using a fault_T input reference.
Block ID
motohawk_single_fault_clear
Library
MotoHawk_lib/Fault Management Blocks
Description
This block clears a single Fault, either by name, or using a fault_T input reference. If the 'clear' input signal is true, the fault will be cleared, otherwise, it is not modified.
Block Parameters
Parameter Field | Values | Comments/Description |
---|---|---|
Fault Source | Drop-down list | Select to determine fault to reset -- by name, or by input reference signal. |
Fault Name | Alpha-numeric text, single-quote enclosed | Specify fault to reset by name.�� No special characters, such as spaces, dashes, commas (underscore allowed) |