MotoHawk:Blocks:Secondary Encoder TDC Offset
From MotoHawk
Revision as of 13:14, 20 July 2012 by Wendy.Bolakowski (talk | contribs) (Created page with "=Secondary Encoder TDC Offset= This MotoHawk™ block sets a secondary global encoder TDC offset in 1/16 degrees before TDC. ==Block ID== motohawk_encoder_offset ==Library...")
Contents
Secondary Encoder TDC Offset
This MotoHawk™ block sets a secondary global encoder TDC offset in 1/16 degrees before TDC.
Block ID
motohawk_encoder_offset
Library
MotoHawk_lib/Encoder Blocks
Description
Use the input to set a secondary global encoder TDC offset, in 1/16 degrees before TDC. This can be used at run-time, for example, to add 360 degrees to change the CAM phase. Typically this is fed by a Calibration block, so that the mechanical vs. electrical TDC offset can be tuned.
Block Parameters
This MotoHawk™ block has no user-definable parameters.
