MLX90363 Opcode Get
Block ID
MLXOpcode Get
Library
DeviceSpecific/motohawk_MLX90363_lib
Description
This block allow the user to extract the received Opcode from a received input vector. The received vector is presented as an output on the MLX90363Send block. The opcode value can be used to decide which MLX90363Receive command to apply to the vector.
The least significant 6 bits of the 7th byte of the input vector are extracted and exported on the opcode output port.
Opcodes can be enumerated using the motohawk_MLX90363_opcode_enum.m script
This block does not cause any data traffic between the device, but allows for convenient processing of received data.
Block Parameters
Parameter Field | Values | Comments/Description |
---|---|---|
None |