CCP CAN DAQ Triggers
Use this MotoHawk™ block to provide one or several data acquisition (DAQ) triggers for use in handling a CAN Calibration Protocol (CCP) connection via CAN.
Block ID
CCP Triggers
Library
MotoHawk_lib/CCP Slave
Description
Double-click on this block to open; the default function trigger scheme opens. These triggers are tied to a multiplexer, which is typically fed to the Command Trigger input of the CCP CAN Protocol Handler External Trigger block. To change the triggering attributes or scheme, open this block and then delete, add or edit trigger blocks as needed.
Block Parameters
For more information on each trigger and on CCP, see the
Function Trigger and
CCP
Handler block help.