24-pin Module Family

See Product Guide for Active Part Numbers and Related Hardware (Connectors, Harnesses, Tools).

ECM-0S12-024

Hardware Features

Microprocessor: MC9S12DT128, 24MHz

Memory: (MC9S12DT128BMPV) 128 K Flash, 8K RAM

Operating Voltage: 8-20VDC

Operating Temperature: -40 to 105 C

Sealed Connectors Operable to 10ft submerged

Inputs

Up to 11 Analog Inputs

1 VR Frequency Input

Outputs

3 TTL Level Ignition System Outputs

2 10A Low Side PWMs

1 1.0A Tachometer Output

1 5A H-Bridge PWM

Datalinks

1 CAN 2.0B Channel

Notes The Processor is a Fixed Point processor. Code Warrior H12 Pro Ed C Compiler required

City IDs: The ECM-0S12-024 default City ID is 0x81 except the 0804 version which has City ID 0x0B.

Variations and Replacement Part Numbers:

The ECM-0S12-024-0502 was updated to the ECM-0S12-024-0802, but has the same functionality as described in the -0502 datasheet.

The ECM-0S12-024-0503 has been updated to ECM-0S12-024-0801 [and ECM-0S12-024-0804 (different hardboot loader)], but has the same functionality as described in the -0503 datasheet.

The -0503 (0801/0804) is a variation of the 0502 (-0802) with different pullup/pull down combinations for the analog ins and three EST’s replaced by more analog ins.

GCM-0S12-024

Hardware Features

Microprocessor: MC9S12DT128, 24MHz

Memory: (MC9S12DT128BMPV) 128K Flash, 8K RAM, 2K EEPROM

Operating Voltage: 8-16VDC

Operating Temperature: -40 to 105 C

Sealed Connectors Operable to 10ft submerged

Inputs

6 Analog Inputs

4 Discrete Inputs

Outputs

4 1.5A Low Side PWMs

Multi-function ESTOP (Detect/Assert)

Optional 0-12V LSO (Easy Link Interface)

Datalinks 2 CAN 2.0B Channel

Notes The Processor is a Fixed Point processor.

Code Warrior H12 Pro Ed C Compiler required

City ID: GCM-0S12-024 default city ID is 0x91.

GCM-OS12-24 Target Definition

There is only one Target for the GCM-OS12-024 modules. This is the GCM-0S12-024-0401. You can use this target to build for the other GCM-0S12-24-0402 and -0403 modules. MotoTune will give a warning, but press OK to continue. The difference between the modules are the pullup/pulldown valuse shown below.

GCM-0S12-024-0401-F00 (MCHI0401) AN1 -- 220.k PD AN2 -- 220.k PD AN3 -- 220.k PD AN4 -- 220.k PD AN5 -- 220.k PD AN6 -- 220.k PD

GCM-0S12-024-0402-F00 (MSIM0401) AN1 -- 51.1k PU AN2 -- 1.00k PU AN3 -- 180. PU AN4 -- 220.k PD AN5 -- 180. PU AN6 -- 1.00k PU

GCM-0S12-024-0403-F00 (SMUX0401) AN1 -- 1.00k PU AN2 -- 1.00k PU AN3 -- 1.00k PU AN4 -- 1.00k PU AN5 -- 1.00k PU AN6 -- 1.00k PU

ISDL FAQ

FAQ for ECM-0565-024-0602 (ISDL)