80-pin Module Family
From MotoHawk
Jump to navigationJump to searchContents
80-pin Module Family
The 80-pin modules are Inactive with the exception of ECM-555-080-0802 C (1751-6402)/F (1751-6403).
The Datasheet for the -0702 modules applies to the -0802 modules.
Part Numbers
ECM-555-080-0802 C: 1751-6402
ECM-555-080-0802 F: 1751-6403
Datasheets
ECM-0555-080-0701 Datasheet (36314)<br\>
- Inactive: For Reference Only. Resource Descriptions, Pinouts, etc., for the ECM-0555-080-0701-F Module
ECM-0555-080-0702 Datasheet (36315)<br\>
- Resource Descriptions, Pinouts, etc., for the ECM-0555-080-0702-C/F Modules
- ECM-0555-080-0702 C/F has been replaced by ECM-0555-080-0802. The -0702 datasheet applies to the -0802<br\>
" ECM-0555-080-0703 Datasheet (36316)<br\>
- Inactive: For Reference Only. Resource Descriptions, Pinouts, etc., for the ECM-0555-080-0703-C/F Module
Hardware Features
- Microprocessor: MPC555, 40MHz
- Memory: 448K Flash, 26K RAM, 8K EEPROM
- 128Kx8 Parallel EEPROM (ECM-0555-080-0703-C)
- Operating Voltage: 9-16VDC
- Operating Temperature: -40° to 105° C
- Sealed connectors operable to 10 ft. submerged.
Inputs
- 15 Analog Inputs
- 3 Low Frequency Digital Inputs
- 1 VR Frequency Input
- Up to 2 Hall Effect Frequency Inputs
- Dual Sensor Wide Band Knock Detection Input
- Dual O2 (Lambda) Sensor
- 1 Emergency Stop Input
Outputs
- 12 3A Peak/1A Hold Injector Drivers
- 8 TTL Level Ignition System Outputs
- 6 6A Low Side PWM
- 1 5A Discrete H-Bridge
- 1 5A PWM H-Bridge
- 1 Relay Driver (Main Power)
- 2 1.5 A Low Side PWM
Datalinks
- 2 CAN 2.0B Channels
- 1 RS485 Channel
Related Hardware
Frequency Asked Questions/Topics
How can I PWM the H-bridges? The only h-bridge that supports PCM is called ETC. The ESC h-bridge can only be used as a One-Shot or Discrete output