MotoHawk:Blocks:Digital Output
From MotoHawk
Jump to navigationJump to searchDiscrete Output
This MotoHawk™ block is used to set the state of a single bit digital output module pin.
Block ID
motohawk_dout
Library
MotoHawk_lib/Digital I/O Blocks
Description
This block is used to control the digital state of a module pin. The input port is of boolean type, and when the input is true, the module pin will also be asserted high.
Block Parameters
Parameter Field | Values | Comments/Description |
Resource | Listed Pin designations per target module | Assign the associated module output pin |
Output Fault Status | Check box (enable) | Enable the Fault Status port. When "Output Fault Status" is checked, a value indicating fault status is provided. This value is one of: 0 - OK 1 - Fault 2 - Indeterminate |
Allow I/O pin to be calibrated from MotoTune | Check box (enable) | Name, Access Levels and MotoTune Group Strings fields available |
Name | Alpha-numeric text, single-quote enclosed | Name as displayed in block, MotoTune - name of calibration which assigns the module resource |
Read Access Level | 1-4 | Sets security lever 1 lowest, 4 highest, for user access to read value in MotoTune |
Write Access Level | 1-4 | Sets security lever 1 lowest, 4 highest, for user access to write value in MotoTune |
MotoTune Group String | Alpha-numeric text | Determines folder name and hierarchy as displayed in MotoTune. Use "|" character between folder names to delineate subfolder structure |