MotoHawk:Blocks:Serial I/O Definition
From MotoHawk
Jump to navigationJump to searchSerial Definition
This MotoHawk™ block defines and initializes the serial port. The Serial Definition Block must be placed in the model in order to use the serial blocks.
Block ID
motohawk_serial_def
Library
MotoHawk_lib/Serial I/O Blocks
Description
This block defines and initializes the serial port. Only one of these blocks is allowed for use per model. Each direction, Transmit and Receive, may have a queue attached. Specify a queue size or 0 if no queue is desired. This block must be placed in the model to use MotoTune via serial.
Block Parameters
Parameter Field | Values | Comments/Description |
---|---|---|
ResourceName | Alpha-numeric text, single-quote enclosed | Give custome name to be used in application. Leaving [] has it use Resource. |
Resource | Drop-down list | Specify module specific resource. |
Use MotoTune | Check Box | Check if this is going to be used to talk with MotoTune. |
Baudrate | Drop-down list | Specify baud rate for transmission. |
Transmit Queue Size | Numeric | Specify message queue size, or 0 for no queue. |
Receive Queue Size | Numeric | Specify message queue size, or 0 for no queue. |