View source for MotoHawk Blocks: Set Encoder Phase

=Set Encoder Phase=

This MotoHawk™ block sets whether the underlying pulse generation system is in or out of phase with the actual engine.

==Block ID==

motohawk_encoder_phase

==Library==

MotoHawk_lib/Encoder Blocks

==Description==

[[Image:Encoder_Phase.PNG]]

Camless 4-stroke crank encoder patterns do not allow, by themselves, a means to determine what half-cycle an engine is operating in. When teeth are detected through rotation the underlying encoder sub-system makes a guess. This guess is either correct or off by 360degCA. Other systems, outside the encoder sub-system, can sometimes be used to determine whether the encoder sub-system has guessed correctly. Set this to true when the guess is incorrect.

==Block Parameters==

{| class="TableMHStyle"
! class="TableHeaderTDStyle" style="width: 172px" | Parameter Field
! class="TableHeaderTDStyle" style="width: 158px" | Values
! class="TableHeaderTDStyle" style="width: 299px" | Comments/Description
|- id="use_indeterminate"
| class="TableTDStyle" style="width: 172px" valign="top" | Allow Indeterminate Input (values other than 0 or 1)
| class="TableTDStyle" style="width: 158px" valign="top" | Check box (enable)
| class="TableTDStyle" style="width: 299px" valign="top" | Enable to allow input other than (0,1).
|}

</div>