MotoFlash

Overview

MotoFlash is an ECM Production Programming tool. The MotoFlash production system provides a complete solution for Electronic Control Module programming.

Key Features

• Simple scan of 2 barcodes to initiate the start of the programming sequence

• Product label printed automatically at the completion of download

• Comprehensive online help system

• User configurable toolbar

Hardware

Computer is not included.

Scanning and Folder Structure

The user can set up preferences as well as scan 2 barcodes in the MotoFlash main window.

The barcodes that are scanned correspond to the two file directories where the programming (.srz) and label (.xml) file are stored. The user scans barcodes corresponding to these file directories and MotoFlash automatically programs the ECU with the srz and prints the .xml label file on programming completion.

An example file directory is shown below: In this example, all of the programming and label files for the MotoFlash production cell are stored in the C:\ECUFiles\MotoFlash root directory. Inside the root directory are two more levels of folders. These folders correspond to the 2 MotoFlash bar code scans. The srz and label file is stored here.

When barcodes corresponding to 8230_942 (Scan1) and 5418_6010 (Scan2) are scanned and entered, MotoFlash will program the ECU with the srz contained in C:\ECUFiles\MotoFlash\8230_942\5418_6010 and then print out the label stored in that directory location.

If the Scan1 ; Scan2 locations do match a valid directory (ex. wrong item is scanned) MotoFlash will give an error that the location is not valid.