MotoHawk:Blocks:Injector Current Select

Injector Current Select

This MotoHawk™ block selects the peak-and-hold injector current driver between the low and high current Peak/Hold selections, for appropriate ECU(s).

Block ID

Injector Current Select

Library

MotoHawk_lib/Advanced Digital I/O

Description

Select the peak-and-hold injector current driver between low and high current Peak/Hold selections. An input of 0 selects the low value and a 1 selects the high value. This block is ONLY necessary with peak/hold (low impedance) injector types, and is not needed with saturation (high impedance) injector types. Only one block is needed per model.

Supported Modules

Module	Low Value	High Value
ECU565-128	3A Peak/ 1A Hold	7A Peak/ 3A Hold

Block Parameters

Parameter Field	Values	Comments/Description
Name	Alpha-numeric text, single-quote enclosed	Choose the Name to reference. No special characters, such as spaces, dashes, commas (underscore allowed).
Resource	Drop-down list	Select from available listings, as appropriate.