MotoHawk:Blocks:Serial I/O Definition

Serial Definition

This MotoHawk™ block defines and initializes the serial port. The Serial Definition Block must be placed in the model in order to use the serial blocks.

Block ID

motohawk_serial_def

Library

MotoHawk_lib/Serial I/O Blocks

Description

This block defines and initializes the serial port. Only one of these blocks is allowed for use per model. Each direction, Transmit and Receive, may have a queue attached. Specify a queue size or 0 if no queue is desired. This block must be placed in the model to use MotoTune via serial.

Block Parameters

Parameter Field	Values	Comments/Description
ResourceName	Alpha-numeric text, single-quote enclosed	Give custome name to be used in application. Leaving [] has it use Resource.
Resource	Drop-down list	Specify module specific resource.
Use MotoTune	Check Box	Check if this is going to be used to talk with MotoTune.
Baudrate	Drop-down list	Specify baud rate for transmission.
Transmit Queue Size	Numeric	Specify message queue size, or 0 for no queue.
Receive Queue Size	Numeric	Specify message queue size, or 0 for no queue.