MotoHawk:Blocks:Fault Status
From MotoHawk
Jump to navigationJump to searchFault Status
This MotoHawk™ block retrieves the current Fault Status, either by name, or using a fault_T input reference.
Block ID
motohawk_fault_status
Library
MotoHawk_lib/Diagnostic Blocks
Description
This block retrieves the current Fault Status, either by name, or using a fault_T input reference. The output may be indicate one of the states Suspected, Active, or Occurred, or all three, as selected.
Block Parameters
Parameter Field | Values | Comments/Description |
---|---|---|
Fault Source | Lookup by name/Input Reference Signal | Select to identify the Fault by name, or by Input Reference Signal. |
Fault Name | Alpha-numeric text, single-quote enclosed. | Enter Fault name to look up (if so selected in Fault Source menu above). No special characters, such as spaces, dashes, commas (underscore allowed). |
Fault Status | Drop-down list | Select Status to be indicated by output, from listed; may be one of the states - Suspected, Active, or Occurred - or all (any of) three. |