MotoHawk:Blocks:Input Capture Definition
From MotoHawk
Jump to navigationJump to searchInput Capture Definition
This MotoHawk™ block configures the Input Capture behavior.
Block ID
Input Capture Definition
Library
MotoHawk_lib/Advanced Digital I/O
Description
Use this block to configure the Input Capture behavior, along with the other Input Capture blocks.
Block Parameters
Parameter Field | Values | Comments/Description |
Name | Alpha-numeric text, single-quote enclosed | Name for this resource, must be a unique name. It is used by the trigger blocks and Input access blocks to associate with this definition. No special characters, such as spaces, dashes, commas (underscore allowed). |
Resource | Drop-down list |
Select input resource (options shown for the module currently selected in the Target Definition block). Note that the CAM input on MPC5xx modules can't be used if an [EncoderDefinition.html Encoder Definition] block exists in the model. |
Trigger Mode | None, Rising Edge, Falling Edge, Both Edges | Select appropriate edge of signal to trigger on. |
Synchronous Edge Detect | Rising Edge, Falling Edge | Select appropriate edge of signal to start measurement. |
Signal Interface | Digital Input/VR Signal | Select type of input signal being captured. |