MotoHawk:Blocks:Push Pull Feedback
From MotoHawk
Revision as of 07:19, 25 July 2013 by Wendy.Bolakowski (talk | contribs) (Created page with "=Push Pull Feedback= This MotoHawk™ block provides access to the push pull feedback in ADC counts. ==Block ID== Push Pull Feedback ==Library== MotoHawk_lib/Diagnostic B...")
Push Pull Feedback
This MotoHawk™ block provides access to the push pull feedback in ADC counts.
Block ID
Push Pull Feedback
Library
MotoHawk_lib/Diagnostic Blocks
Description
This block can also be used in combination with the [PushPullFeedbackGet.html Push Pull Feedback Get] block if the definition of the Fault Status needs to be separated from the accessor. The "Name" parameter can be empty. If it is, then the Name is inherited from the resource selected. For some targets, a value of 65535 is an indeterminate value, not an actual ADC reading.
Block Parameters
| Parameter Field | Values | Comments/Description |
|---|---|---|
| Name | Alpha-numeric text, single-quote enclosed. | Provide a name, or leave blank (Name is then inherited from the resource selected). No special characters, such as spaces, dashes, commas (underscore allowed). |
| Resource | Drop-down list | Select resource for feedback as available from the list. |
| Show Ports | Check box (enable). | Select to make the block's Output port available for use in the model. |
