MotoHawk:Blocks:Time to Nominal Current Definition
Contents
Time to Nominal Current Definition
This MotoHawk™ block creates a resource that allows the last observed time to nominal load current diagnostic to be read. This block can be used directly to recover the time or the Time to Nominal Current access block used, which references this block. Whether this feature is supported is driven by the hardware in use. The feature is not supported if the block has an empty resource list.
Currently, the block is only supported on ECM-OH.
Block ID
Time to Nominal Current Defn
Library
MotoHawk_lib/Diagnostics
Description
Signals
Time to Nominal Current (uS)
Recovers the last observed time to nominal current. Typically the block is used within an end of actuation trigger block so that the time can be recovered upon completion of actuation. A negative value (-1) implies that the selected resource did not achieve the nominal load current. Reasons for this include the load being open circuit (a fault condition) or insufficient battery voltage to achieve the specified nominal current. The nominal current is either specified by a different MotoHawk™ block or defined by the hardware. This block does not specify the nominal current.
Block Parameters
Parameter Field | Values | Comments/Description |
Name | Alpha-numeric text, single-quote enclosed |
This name will be used by associated [TimetoNominalCurrent.html Time to Nominal Current] accessor block to reference this definition. No special characters, such as spaces, dashes and commas (underscore allowed) |
Resource | Drop-down list | Module resource for this block (target module dependent). |